Products
BCQ-GL-1 type (normal) from the weight limiter
Author:Anonymous Update:2013-7-11 Hits:0
Features and Uses
BCQ-GL-1-type lifting limiter can be used for all kinds of single beam electric hoist lifting equipment, pressure sensors can be directly beside the rope, when overloading the instrument sound and light alarm. This model limiter easy to install, affordable.
Dimensions
Technical parameters
|
Scope
|
0.5T ~ 32T kinds of electric hoist single girder cranes
|
|
Systematic errors
|
Less than ± 5% (F · S)
|
|
Alarm mode
|
Sound and light alarm
|
|
Pre-alarm points
|
When the rated lifting weight lifting weight of 90%, the issue of intermittent alarm sound (short beeps), indicating heavy weight
|
|
Ratings alarm
|
When the rated lifting weight lifting weight of 100%, the issue of intermittent alarm sound (long beeps), yellow light, indicating heavy weight
|
|
Police immediately
|
When the rated lifting weight lifting weight of 110%, emits a continuous alarm sound, the red indicator light, and the delay of 2 seconds automatically cut off the power contactor crane rising, indicating heavy weight.
|
|
Sensor overload
|
Sensor overload 1.5 times the rated load
|
|
Operating Temperature
|
-20 ℃ ~ +60 ℃
|
|
Relative humidity
|
45% to 95% |
|
Supply Voltage
|
AC380V, 50Hz or according to user requirements
|
|
Relay contact capacity
|
Relay contact capacity AC380V, 2A
|
|
Pressure controller
|
To 2000V
|
|
Display method
|
Four LED (red) from the weight of the digital display
|